- 產品服務
- >
- 連接器
- >
- 連接器尾附
EMIRFI Non-Environmental Backshells with Strain Relief Series 38
A choice of 360° shield/screen terminations are offered in straight and angled backshells, including designs to accommodate combinations of individual or overall shields or screens. All designs included in this section provide low dc resistance across the termination area. Selection is based primarily on cable construction — what type of shield is being terminated, where the shield or combination of shields is located within the cable and the type of outer jacketing are key variables.
For assistance in selecting the right style of conical shield ring backshell for your application please review the following type descriptions and assembly instructions, or call our factory for assistance.
Type A Assembly Instructions
For heavy and medium duty applications, an EMI/RFI backshell which features two tapered conical rings which capture the overall cable/harness shield inside a counterbore in the backshell body. Shield "WALL" thickness range: 0 to .062 (1.6mm).
· Assembly Instructions - Type A Shield Terminations
| EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| EMI/RFI Non-Enviromental Backshell with Strain Relief |
Type B Assembly Instructions
A medium or general duty design which accomodates either an overall cable/harness shield, or shields or ground wires from individually shielded complexes, or both simultaneously. A tapered ground ring which seats into a corresponding tapered surface in the backshell affords full peripheral termination. Shield "WALL" thickness range: .031 (0.8mm) to .188 (4.8mm).
· Assembly Instructions - Type B Shield Terminations
| EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| EMI/RFI Non-Enviromental Backshell with Strain Relief |
Type C Termination
Two versions: medium and light duty shield termination designs which have a tapered grounding ring mating to a tapered surface on the rear of the backshell for 360° shield termination of an overall braided shield. Light duty termination designs are specifically configured for weight-sensitive applications. Shield "WALL" thickness range to max of .062 (1.6mm).
· Type C1 Heavy Duty Assembly Instructions
· Type C1 Light Duty Assembly Instructions
| 380-005 EMI/RFI Non-Environmental Backshell Heavy-Duty with Strain Relief | |
| 380-006 EMI/RFI Non-Environmental Backshell Heavy-Duty with Strain Relief | |
| 380-007 EMI/RFI Non-Enviromental Backshell Light-Duty with Strain Relief | |
| 380-008 EMI/RFI Non-Enviromental Backshell Light-Duty with Strain Relief | |
| 380-106 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief |
Type D Assembly Instructions
A light duty termination design for either overall or individual shield temination. A tapered grounding ring mates with a corresponding tapered surface in the backshell cable entry area. Shield "WALL" thickness range 0 to .062 (1.6mm).
· Assembly Instructions - Type D Shield Terminations
| 380-009 EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| 380-010 EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| 380-107 EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| 380-013 EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| 380-014 EMI/RFI Non-Enviromental Backshell with Strain Relief | |
| 380-111 EMI/RFI Non-Enviromental Backshell with Strain Relief |
Type E Assembly Instructions
- Email:support@ewisys.cn
- 傳真：0335-8068169
- 電話：0335-8011800/8061180
地址：秦皇島市經濟技術開發區洋河道12號樓1101室 郵編：066000
copyright ? 2016 秦皇島翼維思航空線纜有限公司 版權所有
冀公網安備13030502000447號